Improper operation of the crusher during use may lead to hidden faults.
Early detection and early detection of faults in normal operation of the crusher can greatly reduce downtime accidents in production, thereby greatly improving production efficiency. To monitor faults without stopping the machine, the first thing is to understand the various operating parameters of the crusher when it is in normal operation. This includes the output of the crusher, the sound of the machine during operation, and the activity status during operation. Only after understanding these basic conditions can the abnormality of the machine be discovered in time. With the data of the normal operation of the machine as a basis, it is also necessary to understand some characteristic manifestations of the machine when it is abnormal. For example, sometimes the machine will have a large shaking sound due to loose screws. For example, sometimes the damage of the internal parts of the machine will lead to a reduction in the output of the machine. Sometimes the damage of the machine will cause the qualified rate of the produced products to decrease. These state characteristics require continuous accumulation of experience in the normal production process, and always pay attention to these abnormal characteristics when using the crusher, so that machine failures can be discovered in time and protected. Of course, in addition to these measures, these professional monitoring instruments can also be used to monitor the operating parameters of the crusher. For example, fault monitoring can be performed by monitoring the changes in the chemical composition of the crusher oil. The combined use of these measures can ensure the normal left turn of the machine. Today's society is developing very fast, and we must better master the knowledge of crushers.
So how do we usually need to properly maintain the hydraulic system of the cone crusher?
1. Ensure the cleanliness of the inside of the cone crusher. There is a lot of dust in ore processing, so pay attention to dust removal during use, and also prevent water from entering the hydraulic oil.
2. When replacing hydraulic oil, it is necessary to pay attention to the use of filters when adding hydraulic oil, and also ensure the cleanliness of the filters. The time for refueling should be appropriate, and the prescribed oil level range must be followed. Cone crusher
3. Ensure the cleanliness of the hydraulic system. Generally, our suggestion to customers is to use the same type of hydraulic oil for cleaning. It is not recommended to use other oils, which may cause damage to the cone crusher.
4. Pay attention to the replacement time of hydraulic oil. It is recommended to replace it soon after the cone crusher is shut down, which is conducive to draining the oil and sediment, and then inject new hydraulic oil.